Sheets of paper Maximum original size: U Setting communication control 1 Description Makes settings for fax transmission regarding the communication. Remove four screws and then remove the scanner motor kyocera kmla with kyocera kmla motor. In the TAD mode, set the time to check if there are any triggers for shifting to fax reception after a connected telephone receives a call. Be particularly careful NOT to touch the guide film or the thin white surface indicated by the A in the illustration. A selection item appears. Turn the machine’s power switch to OFF and unplug the machine from the power supply before installing the fax system.

Uploader: Zulubei
Date Added: 19 March 2006
File Size: 33.4 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 13539
Price: Free* [*Free Regsitration Required]

Screw Fuser unit Screw Figure Splitting the fuser unit Paper tag Figure Install a toner container.

Handle it with great care. U Image scanning section problem. Decrease it if the received image does not include all transmitted data. U Setting communication control 2 Description Makes settings regarding fax transmission. Be sure to change the setting according to the type of telephone connected to the machine.

Also check for continuity within the PWB make poor contact. The high voltage bias generator circuit is mounted on a separate PWB. You can’t post answers that contain an email address.

Related Drivers  VODAFONE K4305 DRIVER

Page Safety precautions This booklet provides safety warnings and precautions for our service personnel to ensure the safety of their customers, their machines as well as themselves during maintenance activities. No one feature makes the Kyocera KM a standout winner, but the total package may be just what your small office needs.

Página principal

Add Your Answer Tips for a great answer: Cassette Figure Cassette spacer 5. Sets the modem detection level. Page Safety warnings and precautions Various symbols are used to protect our service personnel and customers from physical danger and to prevent damage to their property.

Remove the pin and then remove the memory cover. Destination code list U kyocra. The transfer roller is negatively biased so that the positively charged toner is attracted onto the paper while it is pinched by the drum and the transfer roller.

Remove the yellow kyovera for scanner unit and the kyocera kmla tag from the left side of the machine. Purpose Used if the exposure kyocer differs significantly between when scanning an original on the contact glass and when scanning an original from the DP.

Page 61 Setting of the reset time Setting defalt original size 1. Check if the feed roller and MP feed roller Check visually and replace any deformed are deformed.


Remove the screw and then remove the scanner motor. Method Press the enter key.

Wait until it cools down. Since the drum surface is evenly charged, whenever it is illuminated by the laser beam, the electrical resistance of the photoconductor is reduced and the potential on the photoconductor is also lowered. Open the front top cover. To remove original jammed in the optional DP, open the DP original cover.

U Increase the setting if a page received in the reduction mode is over-reduced and too much trailing edge cont. Remove the orange protective seal.


Page 41 Initialization procedure after installation of fax system 1. Paper Feeding Mechanism 2 Paper feeding mechanism Driving power train A For process unit; drum From main unit B For process unit; toner container, developing roller etc.

In the TAD mode, change the setting when fax reception is unsuccessful or a telephone fails to receive a call. MP feed clutch gear Grounding Stop ring